S'abonner

DEM analysis of the effect of joint geometry on the shear behavior of rocks - 01/12/17

Doi : 10.1016/j.crme.2017.07.004 
Mingjing Jiang a, b, c, , Jun Liu b, c, Giovanni B. Crosta d, Tao Li b, c
a State Key Laboratory for Disaster Reduction in Civil Engineering, Tongji University, Shanghai, 200092, China 
b Key Laboratory of Geotechnical and Underground Engineering of Ministry of Education, Tongji University, Shanghai, 200092, China 
c Department of Geotechnical Engineering, College of Civil Engineering, Tongji University, Shanghai, 200092, China 
d Department of Earth and Environmental Sciences, Università degli Studi di Milano–Bicocca, Milano, Italy 

Corresponding author at: Department of Geotechnical Engineering, College of Civil Engineering, Tongji University, Shanghai, 200092, China.Department of Geotechnical EngineeringCollege of Civil EngineeringTongji UniversityShanghai200092China

Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.

pages 18
Iconographies 23
Vidéos 0
Autres 0

Abstract

In order to comprehensively investigate the effect of different joint geometries on the shear behavior of rocks, the Distinct Element Method (DEM) was utilized with a new bond contact model. A series of direct shear tests on coplanar and non-coplanar jointed rocks was simulated using the PFC2D software, which incorporates our bond contact model. Both coplanar jointed rocks with different joint persistence and non-coplanar ones with different joint inclinations were simulated and investigated numerically. The numerical results were compared and discussed with relevant laboratory tests as well as some reported numerical works. The results show that for coplanar jointed rocks, the peak shear stress decreases nonlinearly with the joint persistence, and the failure process can be divided into four stages: elastic shearing phase, crack propagation, failure of rock bridges, and residual phase. For non-coplanar jointed rocks, as the absolute value of the inclination angle of the rock joints increases, its shear strength increases, changing the failure patterns and the length of new fractures between existing cracks. When the absolute value increases from 15° to 30°, the average shear capacity increases the most as 39%, while the shear capacity increases the least as 2.9% when the absolute value changes from 45° to 60°. There is a good consistency of the failure patterns obtained from experiments and numerical tests. All these demonstrate that the DEM can be further applied to rock mechanics and practical rock engineering with confidence in the future.

Le texte complet de cet article est disponible en PDF.

Keywords : Rock joints, Distinct element method, Particle bonding, Joint geometries, Direct shear test


Plan


© 2017  Académie des sciences. Publié par Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Vol 345 - N° 11

P. 779-796 - novembre 2017 Retour au numéro
Article précédent Article précédent
  • Effect of regularized functions on the dynamic response of a clutch system using a high-order algorithm
  • Youssef Hilali, Bouazza Braikat, Hassane Lahmam, Noureddine Damil
| Article suivant Article suivant
  • On a new electromechanical switch using the reversible wavy elastic response of metallic glass ribbons
  • Mohamed Abdelbasset Yousfi, Cheima Ammari, Khalil Hajlaoui, Nikolaos T. Panagiotopoulos, Konstantinos Georgarakis, Zoubeir Tourki

Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.

Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’achat d’article à l’unité est indisponible à l’heure actuelle.

Déjà abonné à cette revue ?

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.