Crack identification method in beam-like structures using changes in experimentally measured frequencies and Particle Swarm Optimization - 04/02/18
pages | 11 |
Iconographies | 19 |
Vidéos | 0 |
Autres | 0 |
Abstract |
In this paper, a technique is presented for the detection and localization of an open crack in beam-like structures using experimentally measured natural frequencies and the Particle Swarm Optimization (PSO) method. The technique considers the variation in local flexibility near the crack. The natural frequencies of a cracked beam are determined experimentally and numerically using the Finite Element Method (FEM). The optimization algorithm is programmed in MATLAB. The algorithm is used to estimate the location and severity of a crack by minimizing the differences between measured and calculated frequencies. The method is verified using experimentally measured data on a cantilever steel beam. The Fourier transform is adopted to improve the frequency resolution. The results demonstrate the good accuracy of the proposed technique.
Le texte complet de cet article est disponible en PDF.Keywords : Crack detection, Vibration analysis, Particle swarm optimization, Finite element method, Experimental modal analysis
Plan
Vol 346 - N° 2
P. 110-120 - février 2018 Retour au numéroBienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.
Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’achat d’article à l’unité est indisponible à l’heure actuelle.
Déjà abonné à cette revue ?