S'abonner

Medial malleolus fractures: A biomechanical comparison of tension band wiring fixation methods - 24/08/18

Doi : 10.1016/j.otsr.2018.06.011 
Esat Uygur a, , Oguz Poyanli a, İbrahim Mutlu b, Talip Çelik b, Fuat Akpinar a
a Orthopaedics and Traumatology department, İstanbul Medeniyet University Göztepe Training and Research Hospital, Kadıköy, Turkey 
b Technology Faculty, Biomedical Engineering, Kocaeli University, Kocaeli, Turkey 

Corresponding author. İstanbul Medeniyet University, Orthopaedics and Traumatology, Egitim Mah, Doktor Erkin Cad, Göztepe Egitim ve Arastirma Hastanesi, 34732 Kadıköy, Turkey.İstanbul Medeniyet University, Orthopaedics and Traumatology, Egitim MahDoktor Erkin Cad, Göztepe Egitim ve Arastirma HastanesiKadıköy34732Turkey
Sous presse. Épreuves corrigées par l'auteur. Disponible en ligne depuis le Friday 24 August 2018
Cet article a été publié dans un numéro de la revue, cliquez ici pour y accéder

Abstract

Background

This study compared the biomechanical properties of three different fixation methods of tension band wirings, used in the treatment of medial malleolus fractures. The first method used an innovative “handmade bent pin” for cerclage fixation. The second method used a U-shaped K-wire to attach the cerclage to the medial tibial cortex. These two novel fixation techniques were compared with the traditional tension band wiring technique which is fixated to the bone by a screw.

Hypothesis

Novel fixation techniques of tension band wiring provide stable fixation.

Material and methods

In this study 27 artificial bone models, which medial malleolus fractures were simulated on, were used. Using an electromechanical test device, the force required to pull out each implant was assessed and compared.

Results

This study found that; while handmade bent pinning resulted averagely 840.25N (range: 647–1066±118.72) and U-shaped K-wire fixation was 381.71N (range: 176–651±150.2) pull out strength, traditional tension band wiring indicated 871.33N (range: 549–1008±137.74) pull out strength.

Discussion

Handmade bent pinning method provide similar results with traditional tension band wiring. Therefore, in suitable cases, it may be an acceptable alternative to traditional tension band wiring techniques when treating malleolar fractures. Although the outcomes of U-shaped K-wire fixation indicated lower than other two groups, the outcomes were comparable with the literature. So while performing tension band wiring, both handmade fixation systems may be used in certain cases. For Orthopaedic surgeons, it is better to know and think about these alternative handmade pinning systems created from simple K-wires during the surgery if needed.

Level of evidence

IV, Biomechanical trial.

Le texte complet de cet article est disponible en PDF.

Keywords : Medial malleolus fractures, Tension bad wiring, Cerclage wiring


Plan


© 2018  Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.

Déjà abonné à cette revue ?

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.