Bulk modulus of Fe-rich olivines corrected for non-hydrostaticity - 25/07/18
Cet article a été publié dans un numéro de la revue, cliquez ici pour y accéder
Handled by Eiji Ohtani
Abstract |
In situ X-ray diffraction was used to measure the isothermal bulk modulus at room conditions (KT0) of synthetic olivines with different iron contents. The chemical formulae of the olivine samples were with x=0.45; 0.64; 0.82; 1, with 1% standard deviation (referenced as Fa45, Fa64, Fa82 and Fa100, respectively). All experiments were performed in the multi-anvil apparatus installed at NSLS beamline X17B2, to pressures up to about 7 GPa. Unit-cell volumes under hydrostatic conditions and differential stresses present in the samples were calculated using the method developed by Singh et al. (1998), and pressures measured using NaCl as a standard were then corrected for these stresses. Using a second-order Birch–Murnaghan equation of state, we obtained the isothermal bulk modulus of each composition: GPa, GPa, GPa and GPa. These values combined with data available in the literature show that the KT0 of Fe-rich olivines increases very slowly with the Fe content, but possibly not in a simple linear trend.
Le texte complet de cet article est disponible en PDF.Keywords : Olivine, Equation of state, High pressure, Differential stress, Bulk modulus
Plan
Bienvenue sur EM-consulte, la référence des professionnels de santé.