S'abonner

Influence of hip center position, anterior inferior iliac spine morphology, and ball head diameter on range of motion in total hip arthroplasty - 28/01/19

Doi : 10.1016/j.otsr.2018.09.021 
Tomonori Tabata, Nobuhiro Kaku , Hiroaki Tagomori, Hiroshi Tsumura
 Department of Orthopaedic Surgery, Faculty of Medicine, Oita University, 1–1, Idaigaoka Hasama-machi, 8795593 Yufu city, Oita, Japan 

Corresponding author.

Bienvenue sur EM-consulte, la référence des professionnels de santé.
Article gratuit.

Connectez-vous pour en bénéficier!

Abstract

Background

Acetabular component orientation, such as high placement and femoral head diameter influence joint stability in total hip arthroplasty (THA), wherein anterior inferior iliac spine (AIIS) shape could cause femoro-acetabular impingement. Little is known regarding the combined influence of these parameters, particularly in the context of developmental dysplasia of the hip. Therefore we conducted a computer simulation study based on computed tomography (CT) data to determine whether: (1) AIIS shape, (2) high placement of acetabular cups, and (3) ball head diameter influence the range of motion (ROM) after THA.

Hypothesis

The decrease in ROM depends on AIIS shape and the ROM decreases even if the femoral head diameter is increased when high placement of acetabular cups.

Patients and methods

CT data from 14 hips of 14 patients were evaluated. Hips were categorized by Hetsroni classification type I (n=6), type II (n=6), and type III (n=2) depending on AIIS shape. ROM was evaluated using CT-based software. Cups were placed at and 5 and 10mm above the normal hip position. The femoral heads used were 28 (standard simulation), 32, and 36mm in diameter. ROM at impingement was measured under flexion (Flex), internal rotation (IR) at 90° flexion (IR at 90Flex), IR at 45° flexion with a 20° adduction (IR at 45Flex20Add), and external rotation at 10° extension (ER at 10Ext).

Results

The mean ROM standard simulation for Flex, IR at 90Flex, IR at 45Flex20Add and ER at 10Ext were: 119.8±5.4°, 31.0±11.3°, 70.0±11.9°, and 33.0±9.7° for type I; 118.5±5.5°, 31.5±2.9°, 71.3±2.2°, and 33.3±3.3° for type II; and 105.5±13.4°, 21.0±15.6°, 61.0±11.3°, and 34.5±2.1° for type III, respectively. There were no significant differences in the ROMs of each type (Flex, p=0.252; IR at 90Flex, p=0.461; IR at 45Flex20Add, p=0.261; and ER at 10Ext, p=0.655). For the high placement of acetabular cups, ROM increase was restricted despite the femoral head diameter increase.

Discussion

Larger femoral head diameters increased ROM, with a lower increase in type III because of bony impingement. ROM decreased with higher cup placement. Expansion effects were minimal, even with larger ball head diameters, and were further decreased in types II and III. Attention should be paid to AIIS shape because bony impingements occur early with higher acetabular cup placement.

Level of evidence

VI Simulation study.

Le texte complet de cet article est disponible en PDF.

Keywords : Total hip arthroplasty, Computer tomography, Range of motion, Bony impingement


Plan


© 2018  Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Vol 105 - N° 1

P. 23-28 - février 2019 Retour au numéro
Article précédent Article précédent
  • Reproducibility of the Dorr classification and its quantitative indices on plain radiographs
  • Ryota Nakaya, Masaki Takao, Hidetoshi Hamada, Takashi Sakai, Nobuhiko Sugano
| Article suivant Article suivant
  • The reliability of a Garden, AO and simple II stage classifications for intracapsular hip fractures
  • Povilas Masionis, Valentinas Uvarovas, Giedrius Mazarevi?ius, Kiril Popov, Šar?nas Venckus, Karolis Baužys, Nar?nas Porvaneckas

Bienvenue sur EM-consulte, la référence des professionnels de santé.

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.