S'abonner

Construction and clinical evaluation of a new customized bite block used in radiotherapy of head and neck cancer - 19/03/19

Fabrication et évaluation clinique d’un nouvel embout buccal individualisé pour la radiothérapie du cancer de la tête et du cou

Doi : 10.1016/j.canrad.2018.05.005 
Z. Feng a, b, P. Wang a
L. Gong a, L. Xu a, J. Zhang a, J. Zheng a, D. Zhang a, T. Tian b, P. Wang a,
a Department of Radiation Oncology, Tianjin Medical University Cancer Institute and Hospital, National Clinical Research Center for Cancer, Tianjin's Clinical Research Center for Cancer, Key Laboratory of Cancer Prevention and Therapy, 300060 Tianjin, China 
b Department of Radiation Oncology, Tianjin Chest Hospital, 300350 Tianjin, China 

Corresponding author at: Tianjin Medical University Cancer Institute and Hospital, Huan-Hu-Xi Road, Ti-Yuan-Bei, He Xi District, 300060 Tianjin, China.Tianjin Medical University Cancer Institute and HospitalHuan-Hu-Xi Road, Ti-Yuan-Bei, He Xi DistrictTianjin300060China
Sous presse. Épreuves corrigées par l'auteur. Disponible en ligne depuis le Tuesday 19 March 2019
Cet article a été publié dans un numéro de la revue, cliquez ici pour y accéder

Abstract

Purpose

In the present study we constructed a new customized bite block and evaluated its effect on dosimetric and clinical features in radiotherapy.

Materials and methods

The key point of this method is using the oral stent and silicon rubber through a procedure of making fine intraoral impressions. For type I customized bite block, only the upper and lower alveoli of the oral stent are coated with silicone rubber and impressions of the teeth can be obtained. For type II customized bite block, all parts of the oral stent are coated with silicone rubber to make sure impressions of the teeth, tongue and other intraoral tissues can be obtained. Sixty patients undergoing radiotherapy of nasal cavity, paranasal sinuses and oromaxillofacial area were evaluated. For each patient, intensity-modulated radiotherapy plans created with and without customized bite block were compared and data were collected on radiation-induced complications.

Results

The total fabricating time was approximately 20minutes, and the cost was approximately 10 US dollars. Type I customized bite block is applicable to cancer of sinuses and nasal cavity. Type II customized bite block is applicable to cancer of the oral cavity, salivary glands, especially tongue cancer. The use of the customized bite block showed promising results in decreasing the radiation dose to organs at risk during intensity-modulated radiotherapy. No patients had oral mucositis (grade 3 or above), taste dysfunction, or xerostomia during and post radiotherapy.

Conclusion

A customized bite block is easy-made and worthy of clinical use.

Le texte complet de cet article est disponible en PDF.

Résumé

Objectifs

Cette étude présente la méthode de la fabrication d’un embout buccal individualisé pour la radiothérapie du cancer de la tête et du cou et discute son influence sur la dosimétrieet sa valeur de son application clinique.

Matériels et méthodes

Pour réaliser un embout buccal individualisé dans cette étude nous avons utilisé des empreintes endobuccales fines en silicone. Pour le type I, seules les alvéoles supérieure et inférieure de l’embout buccal buccale ont été revêtues de caoutchouc de silicone et des empreintes de dents ont pu être obtenues. Pour le type II, toutes les parties de l’embout buccal ont été recouvertes de silicone pour s’assurer que les empreintes des dents, de la langue et d’autres tissus intraoraux pouvaient être obtenues. Les résultats obtenus chez 60 patients irradiés dans la cavité nasale, les sinus paranasaux et la zone oromaxillofaciale ont été évalués. Pour chaque patient, les plans de radiothérapie conformationnelle avec modulation d’intensité créés avec et sans embout buccal ont été comparés et des données ont été collectées sur les complications radio-induites.

Résultat

La fabrication d’un embout buccal individualisé prend environ 20minutes et le coût total est d’environ 10 dollars américains. Le type I est utilisé principalement pour le cancer des cavités nasosinusiennes, le type II pour les cancers de la cavité buccale et des glandes salivaires, en particulier pour le cancer de la langue. L’utilisation d’un embout buccal individualisé peut réduire la dose délivrée aux organes à risque. Au cours et après la radiothérapie, aucun patient n’a été atteint de mucite orale de grade 3 ou plus, de dysgueusie ou de xérostomie.

Conclusion

La simplicité de la méthode de fabrication d’un embout buccal individualisé permet de lancer l’utilisation clinique.

Le texte complet de cet article est disponible en PDF.

Keywords : Bite block, Head and neck cancer, Oral complications, Radiotherapy

Mots clés : Embout buccal, Cancer de la tête et du cou, Complications orales, Radiothérapie


Plan


© 2019  Société française de radiothérapie oncologique (SFRO). Publié par Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.

Déjà abonné à cette revue ?

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.