Comparison of locking and non-locking reconstruction plate-screw system in lateral mandibular defects by finite element analysis - 09/12/20
Cet article a été publié dans un numéro de la revue, cliquez ici pour y accéder
Abstract |
Purpose |
The purpose of this study is to analyze and compare stress distribution on bone screws and plate systems in locking and non-locking screw-plates design in lateral mandibular defects.
Material and methods |
Solid mathematical model of mandible was created by three-dimensional finite elements analysis and 25 mm length of lateral resection (L defect) was performed on the model. Models were reconstructed with 2.4 locking and non-locking reconstruction plate system. Each masticator muscles attached to mandible were simulated as direction, attachment area and magnitude on 3D model to compare with reality. The stress formation on bone and hardware system were evaluated.
Result |
The stress values on the cortical bone, plate and screw system were higher in conventional plate model than the locking system model. The highest stress values were measured in the proximal segment especially in conjunction with conventional screw system. Furthermore, the distribution of stress on the bone surface was more homogenous in the locking system.
Conclusion |
It is evident that the use of the locking system in 25 mm length lateral mandibular defects provides an additional advantage over conventional systems in reconstruction models.
Le texte complet de cet article est disponible en PDF.Keywords : Finite element analysis, Mandibular reconstruction, Locking plate systems
Plan
Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.
Déjà abonné à cette revue ?