S'abonner

Investigation of the biomechanical stability of Cfr-PEEK in the treatment of mandibular angulus fractures by finite element analysis - 19/05/22

Doi : 10.1016/j.jormas.2022.05.008 
Tolunay Avci , Mehmet Melih Omezli, Damla Torul
 Department of Oral and Maxillofacial Surgery, Ordu University, Ordu, Turkey 

Corresponding author: Tolunay Avci, DDS, Ordu University, Faculty of Dentistry, Department of Oral and Maxillofacial Surgery, Altınordu/Ordu, Turkey, 52200DDS, Ordu UniversityFaculty of Dentistry, Department of Oral and Maxillofacial SurgeryAltınordu/OrduTurkey52200
Sous presse. Épreuves corrigées par l'auteur. Disponible en ligne depuis le Thursday 19 May 2022
Cet article a été publié dans un numéro de la revue, cliquez ici pour y accéder

Abstract

The purpose of this study is to explore the effectiveness of Cfr-PEEK, in the fixation of unfavorable fractures of mandibular angulus by comparing it with the titanium and resorbable biomaterials. 8 different fixation models were created. In the first 4 groups, a single mini plate was applied to the upper edge of the fracture line by the Champy method. In the other 4 groups, an additional plate was placed on the lower edge of the fracture line. In these models, titanium, resorbable and Cfr-PEEK plate/screw systems were investigated by the finite element analysis method. The highest Von Mises stress was observed on the upper plate in the group 5 while the lowest was seen in the lower plate in the group 7. The highest stress values on the screws were observed on the screws placed closer to the fracture line. Considering the stresses on the bone around the screws, the highest Pmax and Pmin values were seen in group 5, and the lowest values were seen in the group 7. The highest displacement was observed in the group 3, while the lowest was observed in the group 5. According to the results it can be said that Cfr-PEEK plate/screw systems may provide advantages by decreasing the stresses on the fixation systems over the titanium plates and providing more stable fixation over the resorbable systems. Cfr-PEEK plates of 2 mm thickness seems to be a potential alternative to 1 mm thick titanium plates.

Le texte complet de cet article est disponible en PDF.

Keywords : Angle fracture, Cfr-PEEK, Stability


Plan


© 2022  Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.

Déjà abonné à cette revue ?

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.