S'abonner

Influence of prolonged immersion on the resistance of arthroscopy knots in biological media - 22/02/13

Doi : 10.1016/j.otsr.2012.09.020 
B. Rousseau a, A. Diop b, F. Atlan a, S. Priam c, F. Aim a, G. Nourissat a, c, d, , N. Maurel b
a Department of Orthopaedic surgery, l, Saint-Antoine Hospital, AP–HP, 75012 Paris, France 
b Biomchanics and Bone Remodeling Research Task force (EPBRO), école nationale supérieure d’arts et métiers, 75012 Paris, France 
c UR4 Research Unit on Stress, Aging & Inflammation. Pierre- et Marie-Curie University, 75012 Paris, France 
d Maussins Private Hopital Group, 67, rue de Romainville, 75019 Paris, France 

Corresponding author. Maussins Private Hopital Group, 67, rue de Romainville, 75019 Paris, France. Tel.: +01 42 03 47 37; fax: +01 40 03 13 57.

Bienvenue sur EM-consulte, la référence des professionnels de santé.
Article gratuit.

Connectez-vous pour en bénéficier!

Sous presse. Épreuves corrigées par l'auteur. Disponible en ligne depuis le Friday 22 February 2013
Cet article a été publié dans un numéro de la revue, cliquez ici pour y accéder

Summary

Introduction

Biomechanical studies of arthroscopic knots have been performed on sutures that were tied manually and tested immediately after tying. We performed this study to evaluate the knot and the suture during the healing phase, which was not evaluated in these previous studies. Our hypothesis was that the biomechanics features of arthroscopic knots may change in relation to the duration of incubation in biological media simulating synovial fluid. Thus our goal was to study the influence of incubation for 30 days in biological media simulating body fluid using a device to standardize knot tying and allow comparison of arthroscopic sutures.

Materials and methods

Three Ultra-High Molecular Weight PolyEthylene (UHMPWE) sutures (Fiberwire, Orthocord and Maxbraid) were tested with a self-locking slip knot (SMC knot). Sixty identical knots were tied using a standardized device, and divided into two groups: the control group « D0 » and the group « D30 » where the knots were soaked in biological media simulating body fluid for 30 days. Cyclic loading tests were then performed on the knots in each group using a machine to define four variables: clinical failure, ultimate failure, knot slippage and the characteristics of failure.

Results

There was no significant difference between the two groups for knot resistance at clinical failure or ultimate failure, without regard to the suture, (P<0.05). After cyclic loading, the most slippage occurred in the Orthocord (≈5.6mm) then the Maxbraid (≈3.55mm) and the Fiberwire (≈2.51mm). The only suture whose slippage was influenced by the duration of incubation was Orthocord. At clinical failure, the loop that slipped the most was the Orthocord suture (≈5.45mm) then the Fiberwire (≈4.8mm) and the Maxbraid (≈4.1mm). In the Orthocord and Maxbraid sutures, knot slippage after clinical failure significantly increased with the duration of suture incubation (P<0.05). The reason for failure was breakage from tearing of suture fibers in all cases.

Conclusion

Prolonged incubation of arthroscopic suture knots influences slippage, which could result in unsuccessful primary attachment of the tendon during the healing phase.

Level of evidence

Level IV. Biomechanical study.

Le texte complet de cet article est disponible en PDF.

Keywords : Sutures, Knots, Healing time, Biomechanical test, Rotator cuff, Arthroscopy, Arthroscopic sutures


Plan


© 2013  Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Bienvenue sur EM-consulte, la référence des professionnels de santé.

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.