S'abonner

Biomechanical study of dynamic changes in L4–L5 foramen surface area in flexion and extension after implantation of four interspinous process devices - 01/04/15

Doi : 10.1016/j.otsr.2014.11.016 
C. Hirsch a, , C. Breque b, S. Ragot c, H. Pascal-Mousselard a, J.-P. Richer d, M. Scepi d, F. Khiami a
a Department of Orthopaedic Surgery, hôpital de la Pitié-Salpêtrière, AP–HP, UPMC University, 75013 Paris, France 
b Laboratoire d’anatomie, Université de Poitiers, 15 rue de l’Hôtel Dieu, TSA 71117, 86073 Poitiers Cedex 9, France 
c Clinical Investigation Centre, Poitiers University, Poitiers, France 
d Anatomy Department, Poitiers University, Poitiers, France 

Corresponding author. Service de chirurgie orthopédique et traumatologique, hôpital de la Pitié-Salpêtrière, AP–HP, UPMC University, 47-83, boulevard de l’Hôpital, 75013 Paris, France. Tel.: +33 6 18 47 39 59.

Bienvenue sur EM-consulte, la référence des professionnels de santé.
Article gratuit.

Connectez-vous pour en bénéficier!

Abstract

Background

Lumbar spinal stenosis is a major public health issue. Interspinous devices implanted using minimally invasive techniques may constitute an alternative to the reference standard of bony decompression with or without intervertebral fusion. However, their indications remain unclear, due to a paucity of clinical and biomechanical data. Our objective was to evaluate the effects of four interspinous process devices implanted at L4–L5 on the intervertebral foramen surface areas at the treated and adjacent levels, in flexion and in extension.

Materials and method

Six fresh frozen human cadaver lumbar spines (L2–sacrum) were tested on a dedicated spinal loading frame, in flexion and extension, from 0 to 10 N·m, after preparation and marking of the L3–L4, L4–L5, and L5–S1 foramina. Stereoscopic 3D images were acquired at baseline then after implantation at L4–L5 of each of the four devices (Inspace®, Synthes; X-Stop®, Medtronic; Wallis®, Zimmer; and Diam®, Medtronic). The surface areas of the three foramina of interest were computed.

Results

All four devices significantly opened the L4–L5 foramen in extension. The effects in flexion separated the devices into two categories. With the two devices characterized by fixation in the spinous processes (Wallis® and Diam®), the L4–L5 foramen opened only in extension; whereas with the other two devices (X-Stop® and Inspace®), the L4–L5 foramen opened not only in extension, but also in flexion and in the neutral position. None of the devices implanted at L4–L5 modified the size of the L3–L4 foramen. X-Stop® and Diam® closed the L5–S1 foramen in extension, whereas the other two devices had no effect at this level.

Conclusion

Our results demonstrate that interspinous process devices modify the surface area of the interspinous foramina in vitro. Clinical studies are needed to clarify patient selection criteria for interspinous process device implantation.

Level of evidence

Level IV. Investigating an orthopaedic device.

Le texte complet de cet article est disponible en PDF.

Keywords : Interspinous process device, Lumbar spinal stenosis, Biomechanics


Plan


© 2015  Elsevier Masson SAS. Tous droits réservés.
Ajouter à ma bibliothèque Retirer de ma bibliothèque Imprimer
Export

    Export citations

  • Fichier

  • Contenu

Vol 101 - N° 2

P. 215-219 - avril 2015 Retour au numéro
Article précédent Article précédent
  • Clinically relevant heterotopic ossification after elbow fracture surgery: A risk factors study
  • C.C. Hong, N. Nashi, H.W. Hey, Y.H. Chee, D. Murphy
| Article suivant Article suivant
  • Relationship between autologous bone graft osteointegration and correction loss after antero-posterior spondylodesis of traumatic vertebral body fracture
  • D. Kubosch, L. Konstantinidis, P. Helwig, A. Hirschmüller, P.C. Strohm, N.P. Südkamp

Bienvenue sur EM-consulte, la référence des professionnels de santé.

Mon compte


Plateformes Elsevier Masson

Déclaration CNIL

EM-CONSULTE.COM est déclaré à la CNIL, déclaration n° 1286925.

En application de la loi nº78-17 du 6 janvier 1978 relative à l'informatique, aux fichiers et aux libertés, vous disposez des droits d'opposition (art.26 de la loi), d'accès (art.34 à 38 de la loi), et de rectification (art.36 de la loi) des données vous concernant. Ainsi, vous pouvez exiger que soient rectifiées, complétées, clarifiées, mises à jour ou effacées les informations vous concernant qui sont inexactes, incomplètes, équivoques, périmées ou dont la collecte ou l'utilisation ou la conservation est interdite.
Les informations personnelles concernant les visiteurs de notre site, y compris leur identité, sont confidentielles.
Le responsable du site s'engage sur l'honneur à respecter les conditions légales de confidentialité applicables en France et à ne pas divulguer ces informations à des tiers.


Tout le contenu de ce site: Copyright © 2024 Elsevier, ses concédants de licence et ses contributeurs. Tout les droits sont réservés, y compris ceux relatifs à l'exploration de textes et de données, a la formation en IA et aux technologies similaires. Pour tout contenu en libre accès, les conditions de licence Creative Commons s'appliquent.