Suscribirse

Does a polyaxial-locking system confer benefits for osteosynthesis of the distal fibula: A cadaver study - 16/08/16

Doi : 10.1016/j.otsr.2016.03.014 
J. Hallbauer a, , K. Klos d, A. Gräfenstein c, P. Simons d, S. Rausch a, T. Mückley c, G.O. Hofmann a, b
a Department of Trauma, Hand and Reconstructive Surgery, Jena University Hospital, Jena, Germany 
b Department of Trauma and Reconstructive Surgery, BG Centres Bergmannstrost, Halle, Germany 
c Department of Trauma, Hand and Reconstructive Surgery, HELIOS Clinical Centre, Erfurt, Germany 
d Department of Foot and Ankle Surgery, St. Vincenz and Elisabeth Hospital, Mainz, Germany 

Corresponding author.

Bienvenido a EM-consulte, la referencia de los profesionales de la salud.
Artículo gratuito.

Conéctese para beneficiarse!

Abstract

Background

In plate osteosynthesis involving the distal fibula, antiglide plating is superior to lateral plating in terms of the biomechanical properties. The goal of this study was to examine whether polyaxial-locking implants confer additional benefits in terms of biomechanical stability.

Methods

Seven pairs of human cadaveric fibulae were subjected to osteotomy in a standardized manner to simulate an uncomplicated Weber B fracture. The generated fractures were managed with a dorsolateral antiglide plate. To this end, one fibula of the pair was subjected to non-locking plating and the other to polyaxial-locking plating. Biomechanical tests included quantification of the primary bending and torsional stiffness. In addition, the number of cycles to failure in cyclic bending loading were determined and compared. Bone mineral density was measured in all specimens.

Results

Bone mineral density was comparable in both groups. Primary stability was higher in the polyaxial-locking group under torsional loading, and higher in the non-locking group under bending loading. The differences, however, were not statistically significant. All specimens except for one fixed-angle construct failed the cyclic loading test. The number of cycles to failure did not differ significantly between polyaxial-locking and non-locking fixation.

Conclusion

In a cadaveric Weber B fracture model, we observed no differences in biomechanical properties between polyaxial-locking and non-locking fixation using an antiglide plate. Based on the biomechanical considerations, no recommendation can be made regarding the choice of the implant. Further biomechanical and clinical studies are required.

Clinical relevance

Information on the behavior of polyaxial-locking plates is relevant to surgeons performing internal fixation of distal fibula fractures.

El texto completo de este artículo está disponible en PDF.

Keywords : Ankle, Fibula fracture, Antiglide plating, Locking plate, Polyaxial, Biomechanical tests


Esquema


© 2016  Elsevier Masson SAS. Reservados todos los derechos.
Añadir a mi biblioteca Eliminar de mi biblioteca Imprimir
Exportación

    Exportación citas

  • Fichero

  • Contenido

Vol 102 - N° 5

P. 645-649 - septembre 2016 Regresar al número
Artículo precedente Artículo precedente
  • Villonodular synovitis of the ankle. Analysis of the risk of recurrence
  • M. Cattelan, F. Bonnomet, G. Bierry, A. Di Marco, D. Brinkert, P. Adam, M. Ehlinger
| Artículo siguiente Artículo siguiente
  • Influence of fixation with two vs. three screws on union of arthroscopic tibio-talar arthrodesis: Comparative radiographic study of 111 cases
  • T. Goetzmann, D. Molé, S. Jullion, O. Roche, F. Sirveaux, A. Jacquot

Bienvenido a EM-consulte, la referencia de los profesionales de la salud.

Mi cuenta


Declaración CNIL

EM-CONSULTE.COM se declara a la CNIL, la declaración N º 1286925.

En virtud de la Ley N º 78-17 del 6 de enero de 1978, relativa a las computadoras, archivos y libertades, usted tiene el derecho de oposición (art.26 de la ley), el acceso (art.34 a 38 Ley), y correcta (artículo 36 de la ley) los datos que le conciernen. Por lo tanto, usted puede pedir que se corrija, complementado, clarificado, actualizado o suprimido información sobre usted que son inexactos, incompletos, engañosos, obsoletos o cuya recogida o de conservación o uso está prohibido.
La información personal sobre los visitantes de nuestro sitio, incluyendo su identidad, son confidenciales.
El jefe del sitio en el honor se compromete a respetar la confidencialidad de los requisitos legales aplicables en Francia y no de revelar dicha información a terceros.


Todo el contenido en este sitio: Copyright © 2024 Elsevier, sus licenciantes y colaboradores. Se reservan todos los derechos, incluidos los de minería de texto y datos, entrenamiento de IA y tecnologías similares. Para todo el contenido de acceso abierto, se aplican los términos de licencia de Creative Commons.