Redesigning blood transfusion services: A process excellence tools-driven quality improvement initiative - 18/11/26
, Bava U. Davood b, Anuneet Tripathi c, Tarun Dhawan d, Anand Mani Tripathi eHighlights |
• | Combined Lean Six Sigma, RCA, CAPA and PDCA redesigned blood-centre workflow. |
• | Issue/reserve turnaround time fell 59% and donor waiting time fell 44%. |
• | Delays across five categories fell by 70 to 99% post-intervention ( P < 0.001). |
• | Wastage halved, QC failures resolved, incidents fell from 75 to 29. |
Abstract |
Background and aim |
Delays in blood component processing strain transfusion services and may harm patients. This study evaluated the impact of structured process excellence tools on operational efficiency, delay incidence and quality indicators at a tertiary care blood centre.
Materials and methods |
Prospective pre–post quality improvement study (July 2024 to December 2025). Consecutive inclusion yielded 1,494 episodes (747 in-hospital blood requests and 747 donor encounters). Phase I established baseline parameters; phase II applied Lean Six Sigma DMAIC, Root Cause Analysis (RCA), Corrective and Preventive Action (CAPA) and the Plan-Do-Check-Act (PDCA) cycle; phase III re-measured identical parameters. Welch's t -test and Chi 2 tests were used; P < 0.05 was considered significant.
Results |
Issue/reserve turnaround time decreased from 48.3 ± 20.9 to 19.8 ± 4.5 minutes (−59.0%, P < 0.001). Donor waiting time decreased from 50.6 ± 9.8 to 28.5 ± 2.7 minutes (−43.7%, P < 0.001). Delay incidence decreased across all five categories ( P < 0.001). Wastage rate decreased from 0.83% to 0.34% and component QC failure from 0.92% to 0%. Incidents decreased from 75 to 29 ( P < 0.001). Transfusion-transmitted infection rate was unchanged. The C/T ratio remained below the conventionally used utilisation benchmark of 2.5 in both phases (1.85 before intervention and 1.84 after intervention).
Conclusion |
A structured, multi-component quality-improvement programme developed using common process excellence tools was associated with improved operational efficiency, reduced delays, and better selected quality indicators in a tertiary-care blood centre. Controlled and multicentre studies incorporating inventory and blood-group-specific measures are required to evaluate sustainability and wider applicability.
Le texte complet de cet article est disponible en PDF.Keywords : Blood centre, Lean Six Sigma, Quality improvement, Turnaround time, Plan-Do-Check-Act, Root cause analysis
Plan
Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.
Déjà abonné à cette revue ?
