Macro- and microporous carbon monoliths with high surface areas pyrolyzed from poly(divinylbenzene) networks - 08/03/10
pages | 5 |
Iconographies | 7 |
Vidéos | 0 |
Autres | 0 |
Abstract |
Carbon monoliths with well-defined macropores and high surface areas were prepared by carbonization of macroporous poly(divinylbenzene) (PDVB) monoliths. The carbonization reactions of PDVB networks are studied by thermal analysis and FT-IR measurements. According to the measurement results, the PDVB networks are mostly pyrolyzed at 430°C and their structures dynamically change to graphite-like structure between 600 and 700°C. The macropore structure retained while the mesopores disappeared after carbonization. In addition, the surface area of the obtained carbons dramatically increased over 900°C. The typical carbon monolith carbonized at 1000°C for 2h had a surface area of 1500m2g−1 and uniform macropores with a diameter of 1μm.
Le texte complet de cet article est disponible en PDF.Keywords : Polymer gels, Porous materials, Spinodal decomposition, Living polymerization, Porous carbons, Macropores, Micropores
Plan
Vol 13 - N° 1-2
P. 207-211 - janvier 2010 Retour au numéroBienvenue sur EM-consulte, la référence des professionnels de santé.
L’accès au texte intégral de cet article nécessite un abonnement.
Bienvenue sur EM-consulte, la référence des professionnels de santé.
L’achat d’article à l’unité est indisponible à l’heure actuelle.
Déjà abonné à cette revue ?