A personalized approach to non-invasive ventilation masks in amyotrophic lateral sclerosis using facial scanning and 3D-printing - 06/12/21

Doi : 10.1016/j.stlm.2021.100027 
Stephen A. Goutman a, ⁎ , Lei Chen b, c , Jeffrey S. Plott b, d, e , Kyle K. Vankoevering d, f, g , Armando Kurili h , Albert J. Shih b , Glenn E. Green f
a University of Michigan Department of Neurology, Ann Arbor, MI, USA 
b Univeristy of Michigan, Department of Mechanical Engineering, Ann Arbor, MI, USA 
c University of Massachusetts Lowell, Department of Mechanical Engineering, Lowell, MA, USA 
d Univeristy of Michigan, Department of Biomedical Engineering, Ann Arbor, MI, USA 
e Univeristy of Michigan, Department of Surgery, Ann Arbor, MI, USA 
f University of Michigan, Department of Otolaryngology, Ann Arbor, MI, USA 
g Ohio State University, Department of Otolaryngology, Columbus, OH, USA 
h University of Michigan, Division of Pulmonary & Critical Care Medicine, Ann Arbor, MI, USA 

⁎Corresponding author at: Department of Neurology, 1500 E Medical Center Dr, Ann Arbor, MI, 48109-5223, USA.Department of Neurology1500 E Medical Center DrAnn ArborMI48109-5223USA

Benvenuto su EM|consulte, il riferimento dei professionisti della salute.
Articolo gratuito.

Si connetta per beneficiarne

Abstract

We fabricated personalized non-invasive ventilation (NIV) mask interfaces for amyotrophic lateral sclerosis (ALS) participants. A NIV cushion design was fit to a contact profile from the participant's topographic facial model obtained from a 3D scanner then converted to a mold that was 3D-printed and subsequently cast with medical grade silicone and affixed to a mask frame. 3D scanner resolution plays an important role in mask interface fabrication, particularly around the nose, and iterative design changes may be needed. This may be an important new strategy to increase use of NIV for persons with ALS; further study is encouraged.

Il testo completo di questo articolo è disponibile in PDF.

Keywords : 3d printing, Non-invasive ventilation, Amyotrophic lateral sclerosis, Personalized medicine


Mappa


© 2021  The Authors. Pubblicato da Elsevier Masson SAS. Tutti i diritti riservati.
Aggiungere alla mia biblioteca Togliere dalla mia biblioteca Stampare
Esportazione

    Citazioni Export

  • File

  • Contenuto

Vol 3

Articolo 100027- settembre 2021 Ritorno al numero
Articolo precedente Articolo precedente
  • Perspective: 3D bioprinted skin - engineering the skin for medical applications
  • Sanjairaj Vijayavenkataraman

Benvenuto su EM|consulte, il riferimento dei professionisti della salute.

@@150455@@ Voir plus

Il mio account


Dichiarazione CNIL

EM-CONSULTE.COM è registrato presso la CNIL, dichiarazione n. 1286925.

Ai sensi della legge n. 78-17 del 6 gennaio 1978 sull'informatica, sui file e sulle libertà, Lei puo' esercitare i diritti di opposizione (art.26 della legge), di accesso (art.34 a 38 Legge), e di rettifica (art.36 della legge) per i dati che La riguardano. Lei puo' cosi chiedere che siano rettificati, compeltati, chiariti, aggiornati o cancellati i suoi dati personali inesati, incompleti, equivoci, obsoleti o la cui raccolta o di uso o di conservazione sono vietati.
Le informazioni relative ai visitatori del nostro sito, compresa la loro identità, sono confidenziali.
Il responsabile del sito si impegna sull'onore a rispettare le condizioni legali di confidenzialità applicabili in Francia e a non divulgare tali informazioni a terzi.


Tutto il contenuto di questo sito: Copyright © 2026 Elsevier, i suoi licenziatari e contributori. Tutti i diritti sono riservati. Inclusi diritti per estrazione di testo e di dati, addestramento dell’intelligenza artificiale, e tecnologie simili. Per tutto il contenuto ‘open access’ sono applicati i termini della licenza Creative Commons.