Towards predictive simulations of machining - 23/03/16
Benvenuto su EM|consulte, il riferimento dei professionisti della salute.
L'accesso al testo integrale di questo articolo richiede un abbonamento.
| pagine | 12 |
| Iconografia | 8 |
| Video | 0 |
| Altro | 0 |
Abstract |
Machining simulations are challenging with respect to both numerical issues and physical phenomena occurring during machining. The latter are mainly related to the description of the bulk material behaviour (plasticity) and surface properties (friction and wear). The aim of this paper is to present what is required for predictive models, depending on their scopes, as well as the needed developments for the future. The paper includes a short review of selected works that are relevant for this purpose as well as conclusions based on our own experience.
Il testo completo di questo articolo è disponibile in PDF.Keywords : Simulations, Machining, High strain rate, Friction, Plasticity
Mappa
Vol 344 - N° 4-5
P. 284-295 - aprile 2016 Ritorno al numero
Articolo precedente
- A methodology to mesh mesoscopic representative volume element of 3D interlock woven composites impregnated with resin
- Manh Hung Ha, Ludovic Cauvin, Alain Rassineux
- Ductile damage prediction in sheet and bulk metal forming
- Houssem Badreddine, Carl Labergère, Khemais Saanouni
Benvenuto su EM|consulte, il riferimento dei professionisti della salute.
L'accesso al testo integrale di questo articolo richiede un abbonamento.
Già abbonato a @@106933@@ rivista ?